Make Everything Easy To With Used Electric Motors

  • January 13, 2024 9:21 am


Motors that run electrically are a fundamental element of a lot of industrial facilities. When a problem occurs the production may come to a standstill and result in significant financial losses. The surplus motors are the most efficient. Motors Time, however, shouldn’t be blamed for being the main reason for motor problems; however, in actual the age factor is less than 20percent of the causes. We will look at 10 reasons for failure of an electric motor.

Winding and Insulation Failure

If a motor has been overworked for a long time, its consumption may exceed the capacity of its entire unit and cause alarms for motor protection that cause “Locked Rotor Fault”, making it inoperable to supply the required power.

The motor winding insulation can fail due to a variety of reasons, such as the thermal degrading caused by imbalanced load or inadequate working conditions. Insufficient working conditions can accelerate the process of deterioration.

Electrical Overload

If the motor in your electric appliance frequently goes off, it could result from overload. The danger of overload is serious since it damages the copper wiring within your motor, and can wear away the copper connection in time.


The presence of a contaminant in the electric motor is a common occurrence due to a variety of reasons. For instance, dirt could block cooling vents and trigger temperatures to rise rapidly; this can be a reason for motor failure. Additionally, dirt may cause winding insulation to degrade if it gets on top of it, reducing the life of it. Additionally, airborne pollutants and contaminants can mix with water and create highly corrosive materials that further reduce its life span.


If a motor causes vibrations that are beyond the acceptable range of tolerance It is recommended to look into the issue promptly to avoid the need for costly repairs and downtime in the event that equipment fails during a time of need. This can reduce costs as repairs can quickly mount up.

Vibrations can result from a variety of causes, such as an unbalanced shaft, misalignment of gears, or a bad bearing. Additionally, a shaft that is not balanced can put additional strain on the other parts of a mechanical drive system.

Leave a Review

Your email address will not be published.